اينجوري صحبت نكنين لطفا
بر حسب اينكه مادربوردت از AGP پشتیبانی می کنه یا نه کارت گرافیک بخر.
در ضمن ببین از چه نوع AGP پشتیبانی می کنه مثلا: APG2x,4x و یا 8x !
اینطور که من از مشخصات مادربوردت فهمیدم باید AGP 2x پیدا کنی!
ببین این مشخصات مادربوردته درسته؟
[left:09cf94cbbc]Processor Intel® Pentium® III/ II 233MHz~933+MHz
or CeleronTM SEPP (Singled-Edge) Processor
Chipset
Intel® 440BX AGPSet Support and PIIX4E South Bridge
Bus Architecture
AGP / PCI / ISA
AGP Connector
Accelerated Graphics Port Connector Supports
AGP 66MHz / 133MHz (Sideband) 3.3V Device
AGP Slot
Supports 2X Mode AGP 66/133MHz (Sideband) 3.3V Device
On Board IDE & Floppy Connectors
2 x UltraDMA/33 Bus Master IDE Ports (Up to 4 IDE Devices). Support UltraDMA/33 : 33MB/Sec (Max)
ATAPI IDE CD-ROM & LS-120 Supported
1 x Floppy Port (3 Mode, up to 2.88MB)
PC Health Monitoring
PC Health Monitoring ASIC Supports CPU Voltage, Fan Status, and System Temperature Detection
Intel® LDCM S/W and ASUS PC Probe Utility Bundled
Smart Slots for Expansion Flexibility*
6 Pure PCI Slots* compliant with PC ' 99 Requirement
6 PCI Slots* and 1 ISA Slot Provides Greatest Expansion
5 PCI Slots* and 2 ISA Slots Ensures Legacy Compatibility
Provide 4 DIMM Slots for Greatest Memory Capacity
System Bus
Intel 440BX AGPset Supports 100MHz Front Side bus
System Memory
4 x 168-pin DIMMs Sockets Support 8MB to 1024MB Memory Capacity.
PC100 SDRAM 8/16/32/64/128/256MB 168-pin SDRAM, ECC supported
PC ' 99 Compliant Colorful I/O
1 x PS/2 Keyboard Port
1 x PS/2 Mouse Port
1 x Parallel Port (ECP, EPP Port)
2 x USB Ports
2 x Serial Ports
On Board PCI IDE
Dual UltraDMA/33IDE Ports Support Greater Than 8.4GB HDD,ATAPI IDE CD-ROM & LS-120
WOL Header Onboard
ATX Power Connector
3V, 5V and 12V 20-pin ATX Power Connector, Soft Power Off Supported
Smart BIOS
Allow Vcore Voltage and System Frequency Adjustable in BIOS without using traditional Jumper
Provide Safe Limit for Dangerous Settings such as Vcore to prevent System Crash
Bootup Block Write Protection against Virus Infection
Support Suspend-To-RAM Function to Save Power
IDE/SCSI HD/MO/ZIP/CD ROM/Floppy Bootup supported
Still Keep Traditional DIP Adjustment
Other Advanced Features
Message LED as a reminder to user not to plug or pull up add-on Cards while SB Power is on
Fan Status/Temperature/Voltage Monitoring and Alert
PS/2 Mouse/Keyboard/Modem Power Up Supported
Package Contents
P3B-F Motherboard x 1
Universal Retention Module x 1
User's Manual x 1
Driver CD x 1
IDE Cable x 1
Floppy Cable x 1
Board Size
ATX Form Factor with size : 19.2cm x 30.4cm (7.55" x 12.0")[/left:09cf94cbbc]