• پایان فعالیت بخشهای انجمن: امکان ایجاد موضوع یا نوشته جدید برای عموم کاربران غیرفعال شده است

فروش ساب وفر آکبند و ارجینال اوریون ORION HCCA152SPL

بسم الله الرحمن الرحیم

کاربر تازه وارد
تاریخ عضویت
6 سپتامبر 2014
نوشته‌ها
58
لایک‌ها
14
سن
38
محل سکونت
تهران خیابان پیروزی
HCCA10.2_20extra_1.jpeg DSC_0830.JPG 15d0d3ff-c7ec-46b9-9692-6376e27fa0c7_1.091294f51502eaea42dadd947d891be1.jpeg a2cbb108-d5ad-46ba-bc59-c0bd98f1abae_1.fef80158c75e122cb02ff5a853439314.jpeg TEC-ORI-HCCA152SPL-alt2.jpg DSC_0902.JPG بسم الله الرحمن الرحیم
سلام
دوستان گرامی بنده یه ساب آکبند (به شرط می تونید بیایید ببینید!) و ارجینال (به شرط می تونید بیایید ببینید!) از برند ORION و رده بالاترین و قویترین ساب آن یعنی HCCA-152-SPL با دو کویل 2 اهمی (یعنی 1 اهم یا 4 اهم) و توان واقعی و حیرت انگیز 5000 وات آر ام اس و توان پیک 20000 وات (روی این حساب باز نکنید همون 5000 وات آر ام اس هستش!) را که به وسیله یکی از دوستان و همکارانم از نمایندگی اوریون در دبی خریداری شده و فرستاده شده رو برای فروش گذاشتم.
راستش این ساب فوق العاده دوس داشتنی رو برای خودم و مختص خودم خریدم، چون خودم هم در زمینه فروش سیستم های صوتی کار می کردم دوس داشتم بهترینش رو داشته باشم (حالا براتون توضیح می دم چرا یه متخصص! بین این همه ساب این رو برای خودش انتخاب کرده!)
قیمت رو 3.000.000 تومن می گزارم! و صحبت ها هم در pm انجام شود و شماره تماسمم: 09124106796
ضمنا این ساب کاملا آکبنده و پشت ویترینی هم نبوده!
این ساب یکی از قویترین ساب های موجود در ایران می باشد و قدرت 5000 وات RMS را دارا می باشد و در تستی که بین ساب های مختلف با شرایط یکسان انجام شده توانسته قدرت خودش رو به خوبی اثباط کنه، البته ساب HCCA152 بدونه پسوند SPL که توان 2000 وات را داراست در این تست شرکت کرده نه این ساب HCCA152SPL با توان 5000 وات RMS ! و ساب های قدرتمندی همچون Cerwin-Vega Stroker و MTX 9500 و Kicker SoloX و ... در این تست حضور دارند و شرایط مسابقه رو هم براتون پیوست کردم:
 

فایل های ضمیمه

  • Orion Subwoofer Challenger - Orion Car Audio.pdf
    270 KB · نمایش ها: 4
Last edited:

Bahram241

همکار بازنشسته
فروشنده معتبر
تاریخ عضویت
1 آپریل 2010
نوشته‌ها
4,678
لایک‌ها
949
محل سکونت
زنجان
استارتر محترم تصاویر به پست اول منتقل شود.
 

بسم الله الرحمن الرحیم

کاربر تازه وارد
تاریخ عضویت
6 سپتامبر 2014
نوشته‌ها
58
لایک‌ها
14
سن
38
محل سکونت
تهران خیابان پیروزی
سلام
این مشخصات HCCA 122 می باشد که البته خیلی ضعیفتر از HCCA152SPL می باشد ولی خوب مشخصاتشون در بیشتر موارد به جز سایز موتور و مگنت و توانشون و ... یکیه:
12" Dual 2 ohm HCCA Series Competition Subwoofer (Black Coil Type)

Specification:
  • Power Handling:​
  • Peak: 5000 watts​
  • RMS: 2500 watts​
  • Enhanced voice coil cooling systems​
  • High temperature PAARC (Polyester Amide, Amide Resin Coated) Voice coil​
  • Dual 2 ohm copper wound voice coil on aluminium former​
  • Sensitivity: 84 dB​
  • Polypropylene dust cap - moisture and UV resistant.​
  • Tall, wide, balanced, NBR Foam (high density expanded polyester foam) surround for linear controlled long excursion using a Tri Radius symmetrical edge design optimized on non-linear FEA.​
  • Paper cone - moisture and UV resistant.​
  • Custom Cast Aluminium frame.​
  • Spider ring attachment screws. Part of re-cone feature (8 hex screws)​
  • Aluminium voice coil former (10” uses 3” voice coil former, 12 & 15 use a 4” voice coil former)​
  • Venting in Voice coil former. Part of the enhanced voice coil cooling system (forced convection)​
  • 11mm Steel front plate.​
  • 1.25” vent. Part of the enhanced voice coil cooling system (forced convection - aluminium heat sinking - shorting rings to reduce inductive heating)..​
  • Voice coil gap vents. Part of the enhanced voice coil cooling system (forced convection - aluminium heat sinking -shorting rings to reduce inductive heating).​
  • Cast aluminium rear pole piece heat sink with fins and vent holes. Part of the enhanced voice coil cooling system (forced convection - aluminium heat sinking)​
  • High temperature (Polyester Amide Resin Coated) Copper clad aluminium voice coil wound on an aluminium former (10” uses 3” voice coil, 12 & 15 use a 4” voice coil) Dual 2 and 4 ohm voice coils available​
  • Screen meshed areas to allow venting below spider to and keep foreign object out of the voice coil gap.​
  • Cast aluminium top pole piece heat sink with fins and vent hole. Part of the enhanced voice coil cooling system (forced convection-aluminium heat sinking-shorting rings to reduce inductive heating).​
  • Bottom flat interlaced Conex spider with stitched and looped tinsel leads attached.​
  • Custom allen head screw terminals. A pair on each side (one pair for each voice coil).​
  • Spider spacer and spider mounting ring assembly part of field re-cone kit attachment method. (eight allen head screws).​
  • Top flat interlaced Conex spider.​
  • Surround clamp ring, part of field re-cone kit attachment method.​
  • Replacement cone kit available: HCCA122CK.​
 
بالا