اين يه مطلب براي فلش A1200 ... به همين سادگي :
1) Download and install RSDlite v2.8+
2) FULLY charge battery to prevent turning your phone into a paperweight ( "brick", "bricking")
3) Download the firmware for your A1200 as preferred
4)On your phone, go to Setup > USB mode > MODEM > Save
5)Turn off your phone
6)Hold the Camera hotkey ( top right ) and then Power On (End Call button) together until a red screen turns on. it should say
" MBM FLASH MODE "
7)Run RSDLite
8)Install drivers if asked to do so
9)Plug the data cable from your computer to your A1200
10)Look for RSDlite to say " Connected " before proceeding ( may take a minute, if not, restart RSDlite )
11)At the top, click the " ... " button to browse for the firmware you downloaded and select it
12)click " start " and watch for any notifications that tells you to install drivers, install as they are presented to you.
13)It may ask you to manually restart the phone – if so, unplug the cable from PC, remove the battery for 5 seconds , put battery back in then turn phone back on. Set it back to USB MODE > MODEM, then plug it back into the computer.
14)If it says "passed" or "completed", unplug the phone, and restart it.
15)Completed flashing of your firmware
درايورهاي مربوط به گوشي A1200 هم ضميمه كردم ... دانلود كنيد .
الان فرصتش نيست .. طي روزهاي آينده راهنماي فارسي به همراه توضيحات اضافه رو هم ميذارم . قراره يك فروند از اين گوشي به دستم برسه .
